Skip to content
ALL ORDERS PLACED BEFORE 4:00PM PST • M-F • WILL SHIP THE SAME DAY! NEXT DAY AIR CUTOFF IS 3:00PM PST
ALL ORDERS PLACED BEFORE 4:00PM PST • M-F • WILL SHIP THE SAME DAY! NEXT DAY AIR CUTOFF IS 3:00PM PST

Discountable Tools

All Tools that are able to be discounted with resellers codes or discount codes.

Filters

$
$

10223 - Injector Sleeve Installer (C-12 Engine)

$100.30 USD - $100.30 USD
$100.30 USD
$100.30 USD - $100.30 USD
$100.30 USD
In stock

Be Proud to own American Made Tools.

$100.30 USD - $100.30 USD
$100.30 USD
$100.30 USD - $100.30 USD
$100.30 USD

20101 - Oil Stopper - Cummins Engine with Jacobs Brake Big Cam 4

$51.58 USD - $51.58 USD
$51.58 USD
$51.58 USD - $51.58 USD
$51.58 USD
In stock

Be Proud to own American Made Tools.

$51.58 USD - $51.58 USD
$51.58 USD
$51.58 USD - $51.58 USD
$51.58 USD

20103 - Liner Driver - Cummins L-10 & NT

$157.62 USD - $157.62 USD
$157.62 USD
$157.62 USD - $157.62 USD
$157.62 USD
In stock

Be Proud to own American Made Tools.

$157.62 USD - $157.62 USD
$157.62 USD
$157.62 USD - $157.62 USD
$157.62 USD

20118 - Cylinder Block Pressure Test Fixture - Cummins NT

$698.35 USD - $698.35 USD
$698.35 USD
$698.35 USD - $698.35 USD
$698.35 USD
In stock

Be Proud to own American Made Tools.

$698.35 USD - $698.35 USD
$698.35 USD
$698.35 USD - $698.35 USD
$698.35 USD

20119 - Coolant Passage Repair Kit - Cummins NT

$379.71 USD - $379.71 USD
$379.71 USD
$379.71 USD - $379.71 USD
$379.71 USD
Low stock

Be Proud to own American Made Tools.

$379.71 USD - $379.71 USD
$379.71 USD
$379.71 USD - $379.71 USD
$379.71 USD

20122 - Soft Plug Installer - Cummins Upper Rocker Box - NT

$71.65 USD - $71.65 USD
$71.65 USD
$71.65 USD - $71.65 USD
$71.65 USD
In stock

Be Proud to own American Made Tools.

$71.65 USD - $71.65 USD
$71.65 USD
$71.65 USD - $71.65 USD
$71.65 USD

20173 - Connecting Rod Guide Stud - Cummins "K" Series - Set of Two

$77.24 USD - $77.24 USD
$77.24 USD
$77.24 USD - $77.24 USD
$77.24 USD
In stock

Be Proud to own American Made Tools.

$77.24 USD - $77.24 USD
$77.24 USD
$77.24 USD - $77.24 USD
$77.24 USD

20175 - Rear Crankshaft Seal/Wear Sleeve Remover & Installer - Cummins ISX & QSX - 3163826

$585.77 USD - $585.77 USD
$585.77 USD
$585.77 USD - $585.77 USD
$585.77 USD
In stock

Rear Crankshaft Seal/Wear Sleeve Remover & Installer - Cummins ISX & QSX. WET FLYWHEEL HOUSING ONLY! OEM alternative to Cummins #3163826. ...

View full details
$585.77 USD - $585.77 USD
$585.77 USD
$585.77 USD - $585.77 USD
$585.77 USD

30080 - Rear Crankshaft Seal Installer - DDA 92 Series

$257.91 USD - $257.91 USD
$257.91 USD
$257.91 USD - $257.91 USD
$257.91 USD
In stock

Be Proud to own American Made Tools.

$257.91 USD - $257.91 USD
$257.91 USD
$257.91 USD - $257.91 USD
$257.91 USD

30111 - Head Test Plates - DDA 71 - 92 Series

$541.62 USD - $541.62 USD
$541.62 USD
$541.62 USD - $541.62 USD
$541.62 USD
Low stock

Be Proud to own American Made Tools.

$541.62 USD - $541.62 USD
$541.62 USD
$541.62 USD - $541.62 USD
$541.62 USD

30134 - Guide Stud Set - DDA 60 Series - 2 ea. Oil Cooler - J-35786

$47.28 USD - $47.28 USD
$47.28 USD
$47.28 USD - $47.28 USD
$47.28 USD
In stock

OEM Alternative to Detroit Diesel #J-35786. Be Proud to own American Made Tools.

$47.28 USD - $47.28 USD
$47.28 USD
$47.28 USD - $47.28 USD
$47.28 USD

30167 - Injector Puller, DD-13/15/16 Series - J-47391

$539.51 USD - $539.51 USD
$539.51 USD
$539.51 USD - $539.51 USD
$539.51 USD
In stock

Injector Puller, DD-13/15/16 Series. OEM Alternative to Detroit Diesel #J-47391. Be Proud to own American Made Tools.

$539.51 USD - $539.51 USD
$539.51 USD
$539.51 USD - $539.51 USD
$539.51 USD

40010 - Timing Block Set

$48.60 USD - $48.60 USD
$48.60 USD
$48.60 USD - $48.60 USD
$48.60 USD
In stock

Timing Block Set - RT 900 & 1200 Series Front & Rear. Be Proud to own American Made Tools.

$48.60 USD - $48.60 USD
$48.60 USD
$48.60 USD - $48.60 USD
$48.60 USD

40100 - Countershaft Bearing Puller - 6610-6613 Series

$91.80 USD - $91.80 USD
$91.80 USD
$91.80 USD - $91.80 USD
$91.80 USD
In stock

Be Proud to own American Made Tools.

$91.80 USD - $91.80 USD
$91.80 USD
$91.80 USD - $91.80 USD
$91.80 USD

40116 - Metric Thread Adaptor 1/2-13 UNC Female to M12 X 1.75 mm Male

$23.18 USD - $23.18 USD
$23.18 USD
$23.18 USD - $23.18 USD
$23.18 USD
In stock

Be Proud to own American Made Tools.

$23.18 USD - $23.18 USD
$23.18 USD
$23.18 USD - $23.18 USD
$23.18 USD

40118 - Countershaft Bearing Puller 7608LL Series

$96.12 USD - $96.12 USD
$96.12 USD
$96.12 USD - $96.12 USD
$96.12 USD
In stock

Front and Rear of Main Box, RT 7608LL Series (Bearing # 20832) Be Proud to own American Made Tools.

$96.12 USD - $96.12 USD
$96.12 USD
$96.12 USD - $96.12 USD
$96.12 USD

40122 - Carrier Bearing Adjusting Socket - Spicer 170/190 Series

$177.60 USD - $177.60 USD
$177.60 USD
$177.60 USD - $177.60 USD
$177.60 USD
In stock

Be Proud to own American Made Tools.

$177.60 USD - $177.60 USD
$177.60 USD
$177.60 USD - $177.60 USD
$177.60 USD

40123 - Rear Countershaft Bearing Puller

$152.39 USD - $152.39 USD
$152.39 USD
$152.39 USD - $152.39 USD
$152.39 USD
In stock

Auxiliary Countershaft Bearing Puller w/Rear Mounted PTO/Bearing #81012/RT 12510-RT 14610. Be Proud to own American Made Tools.

$152.39 USD - $152.39 USD
$152.39 USD
$152.39 USD - $152.39 USD
$152.39 USD

40125 - Countershaft Pusher for Eaton Roadranger

$86.40 USD - $86.40 USD
$86.40 USD
$86.40 USD - $86.40 USD
$86.40 USD
In stock

Used to push countershaft out of bearings (Front Main and Rear Auxiliary). Note - Not for RT-610 (either) or  613 (Front). Be Proud to own American...

View full details
$86.40 USD - $86.40 USD
$86.40 USD
$86.40 USD - $86.40 USD
$86.40 USD

40126 - Timing Block-RT 7608LL

$45.90 USD - $45.90 USD
$45.90 USD
$45.90 USD - $45.90 USD
$45.90 USD
In stock

Be Proud to own American Made Tools.

$45.90 USD - $45.90 USD
$45.90 USD
$45.90 USD - $45.90 USD
$45.90 USD

50060 - Thermostat Seal Installer - DT466

$94.56 USD - $94.56 USD
$94.56 USD
$94.56 USD - $94.56 USD
$94.56 USD
In stock

Be Proud to own American Made Tools.

$94.56 USD - $94.56 USD
$94.56 USD
$94.56 USD - $94.56 USD
$94.56 USD

50100 - Pin Locating Fixture - Spicer & Mack Double Disc Clutches

$57.32 USD - $57.32 USD
$57.32 USD
$57.32 USD - $57.32 USD
$57.32 USD
In stock

Be Proud to own American Made Tools.

$57.32 USD - $57.32 USD
$57.32 USD
$57.32 USD - $57.32 USD
$57.32 USD

50114 - Nozzle Puller - DT466

$114.63 USD - $114.63 USD
$114.63 USD
$114.63 USD - $114.63 USD
$114.63 USD
In stock

Be Proud to own American Made Tools.

$114.63 USD - $114.63 USD
$114.63 USD
$114.63 USD - $114.63 USD
$114.63 USD

50141 - Counterbore Shim Cutter Plate - Izuzu 6RB1 Engine

$424.84 USD - $424.84 USD
$424.84 USD
$424.84 USD - $424.84 USD
$424.84 USD
In stock

ALL CUTTER BITS ARE NON WARRANTY ITEMS Be Proud to own American Made Tools.

$424.84 USD - $424.84 USD
$424.84 USD
$424.84 USD - $424.84 USD
$424.84 USD

50142 - Nozzle Sleeve Remover Kit - IHC VT365, Ford 6.0L Engines - ZTSE-4528

$122.30 USD - $122.30 USD
$122.30 USD
$122.30 USD - $122.30 USD
$122.30 USD
In stock

OEM Alternative tooling #ZTSE-4528. Be Proud to own American Made Tools.

$122.30 USD - $122.30 USD
$122.30 USD
$122.30 USD - $122.30 USD
$122.30 USD

50143 - Nozzle Sleeve Installer - IHC VT365, Ford 6.0L Engines - ZTSE-4529

$48.92 USD - $48.92 USD
$48.92 USD
$48.92 USD - $48.92 USD
$48.92 USD
In stock

OEM Alternative tooling #ZTSE-4529. Be Proud to own American Made Tools.

$48.92 USD - $48.92 USD
$48.92 USD
$48.92 USD - $48.92 USD
$48.92 USD

50148 - Steering Wheel Puller Adaptor Set

$120.30 USD - $120.30 USD
$120.30 USD
$120.30 USD - $120.30 USD
$120.30 USD
In stock

Be Proud to own American Made Tools.

$120.30 USD - $120.30 USD
$120.30 USD
$120.30 USD - $120.30 USD
$120.30 USD

10229-3 - Cutter Bit (CAT # 159-9403 for # 159-9402 Plate only)

$102.60 USD - $102.60 USD
$102.60 USD
$102.60 USD - $102.60 USD
$102.60 USD
In stock

This bit is used ONLY on the CAT manufactured cutter plate CAT#159-9402. This is NOT for use with the Monaco Tool Cutter Plate #10229. Please see C...

View full details
$102.60 USD - $102.60 USD
$102.60 USD
$102.60 USD - $102.60 USD
$102.60 USD

20060-013 - Rear Cam Bearing Puller Kit-Mack E-6 (Guide & Collet)

$252.46 USD - $252.46 USD
$252.46 USD
$252.46 USD - $252.46 USD
$252.46 USD
In stock

You will need Monaco Tool's Puller Bar to use this tool correctly. Be Proud to own American Made Tools.

$252.46 USD - $252.46 USD
$252.46 USD
$252.46 USD - $252.46 USD
$252.46 USD

20060-43 - Cam Bearing Adaptor Set - MBE 4000 Series

$421.64 USD - $421.64 USD
$421.64 USD
$421.64 USD - $421.64 USD
$421.64 USD
In stock

Cam Bearing Adaptor Set - MBE 4000 Series You will need Monaco Tool's, 24 & 55 inch Bar kit for use with these adaptors. Please see Monaco Tool...

View full details
$421.64 USD - $421.64 USD
$421.64 USD
$421.64 USD - $421.64 USD
$421.64 USD

20111-50 - Service Kit - Cummins NT Series

$538.75 USD - $538.75 USD
$538.75 USD
$538.75 USD - $538.75 USD
$538.75 USD
Low stock

Be Proud to own American Made Tools.

$538.75 USD - $538.75 USD
$538.75 USD
$538.75 USD - $538.75 USD
$538.75 USD

20120-5 - L-10 Adaptor

$85.97 USD - $85.97 USD
$85.97 USD
$85.97 USD - $85.97 USD
$85.97 USD
Low stock

L-10 Adaptor  To be used with early 20120 Setting Fixture Be Proud to own American Made Tools.

$85.97 USD - $85.97 USD
$85.97 USD
$85.97 USD - $85.97 USD
$85.97 USD

30114-A - Water Pump Seal Installer - DDA V71/92 Series

$90.27 USD - $90.27 USD
$90.27 USD
$90.27 USD - $90.27 USD
$90.27 USD
In stock

Works on Seal #23520059. Be Proud to own American Made Tools.

$90.27 USD - $90.27 USD
$90.27 USD
$90.27 USD - $90.27 USD
$90.27 USD

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare